Archer Fine Transfers

US National Insignia - White 10 different sizes for vehicles other than Shermans

Decal Set #: AR74002W Review by - Al Magnus

This is an excellent set of rub on dry transfers for plain US star markings.
There are a total of 54 images for 11 (although the sheet says there are 10) different sizes on a sheet that's 37.5mm long by 30mm wide.

Size (inches)Number of Images

An extra bonus comes from the lettering for the star sizes and the manufacturer's name and part number, which are also dry transfer images and could be put to use on other models!

These are dry transfers though, much like the old Letraset decals many years ago, so they are very easy to apply to flat surfaces. Curved and ridged surfaces will be more of a challenge and it may be easiest to rub the images onto clear decal paper and apply them to your model like any other wet transfer.

Another consideration will be the fact that once you rub them onto the model they can not be shifted to another spot should you realize they are not aligned properly. Once down the only option is to remove them and try again.

Help with how to apply Archer Transfers can be found here: Archer Instructions.

Review sample purchased by the author.

Back to Archer Fine Transfers Kit List Back to Home Page

Article Last Updated: 08 December 2009